chemical pumps and pumping equipment


Tel +44 (0)1625 874598 Fax +44 (0)1625 871612

Custom Built Pumping Equipment  |  Inspection & Testing Facilities  |  Reconditioned Pumps, Spares & Repairs




  Site Index












Vertical Canned 2 Stage Pumpset

 (click image for larger picture)








PATS Ref No. 2486 (2 stage)_2004
Pump :  Vertical
Category :  VS6
Pump Size :  2 Stage
Model :  EMU KM 1300 S (Modified by PATS
Liquid Pumped :   Potable Water
Flow Rate : 396  M3/HR
Head : 102  Metres
Temperature : 20  C
Materials Used : 316 St St / Bronze Imp
Additional Information :


Booster Pumpset C/w 200 kw 2 pole motor. Vertical mounted, canned multi-stage centrifugal pump.

The pump stages are housed within a can. the top flange of which is used for mounting the pump. The lower end of the pump shaft runs in sleeve bearings lubricated by the process fluid. Replaceable front and rear impeller wear rings are provided in the pump casings. The pump head carries the in-line suction and discharge flanges.

A single mechanical cartridge seal has a through flush of process fluid. The pump top housing carries the pump shaft thrust bearings, which are grease lubricated. The drive motor is flanged mounted on the top housing with a flexible coupling to the pump shaft.


End User - Water Treatment, UK









 Registered in England & Wales No. 3514372
Registered Office: Rainow Mill, Ingersley Vale, Bollington, Cheshire SK10 5BP