chemical pumps and pumping equipment

sales@pumptech.co.uk

 

Tel +44 (0)1625 874598 Fax +44 (0)1625 871612

Custom Built Pumping Equipment  |  Inspection & Testing Facilities  |  Reconditioned Pumps, Spares & Repairs

 

 

 

  Site Index

 

 

 

 

 

 

 

 

 

 

 

Vertical Pumps

 

 

 (click these buttons for details and examples of each type)

 

 

General Detail

 

There are various types of vertical pumps available, below are the types of units which PATS either supply on a service agency basis or which are designed and manufactured in-house. 

The demand for specially designed VS4 units has enabled PATS to specialise in this area. The unique floating bush bearing designs can result in extremely long bearing life and steam jacketed versions for pumping molten liquids are a major part of PATS output. In addition PATS has also developed the VS5 unit in that it’s recessed impeller design does not generate any axial or out of balance radial thrust loads

 

 

 VS1

 

      VS1 Vertical Pumps
  • Most popular/best known

  • ‘Flow through’ casing bowl

  • Higher pressures easily achieved

  • Limitless pit/borehole depth 

  • Specialised versions for critical services available

  • Single or Multistage designs

  • click here for details and examples of VS1 pumps

 

 

 VS2

 

      VS2 Vertical Pumps
  • Wet pit volute casing design

  • High head single stage

  • ‘Flow through’ casing bowl

  • Limitless pit/borehole depth 

  • Specialised versions for critical services available

  • Supplied on a service agency basis

  • click here for details and examples of VS2 pumps

 

 

 VS3

 

      VS3 Vertical Pumps
  • ‘Flow through’ casing bowl

  • Axial- Flow Hydraulics

  • Higher Flow rates easily achieved

  • Low Head

  • Limitless pit/borehole depth can be accommodated

  • Specialised versions for critical services available

  • click here for details and examples of VS3 pumps

 

 

 VS4

 

      VS4 Vertical Pumps
  • Non-pressurised shaft entry point

  • Suitable for restricted emissions applications 

  • PATS unique floating bush bearing design

  • Steam jacketed version for molten liquids

  • Lineshaft bearings available in various materials

  • Bearings - Product feed lubricated if required

  • Bearings - Clean feed available

  • Bearings - Grease pump systems available

  • click here for details and examples of VS4 pumps

 

 

 VS5

 

      VS5 Vertical Pumps
  • Unlike VS4 has no shaft bearings below mounting plate

  • Known as ‘cantilever shaft’ pump 

  • Ideal for slurry pumping 

  • Small sump variation – direct motor mount construction

  • Recessed impeller hydraulic end variation

  • PATS unique recessed impeller design

  • click here for details and examples of VS5 pumps

 

 

 VS6

 

      VS6 Vertical Pumps
  • Sometimes called ‘False Borehole Pump’

  • ‘Flow through’ casing bowl

  • Higher pressures easily achieved

  • Higher Flows Availabe

  • As VS1 but with outer casing

  • Specialised versions for critical services available

  • Multiple Stages Available

  • click here for details and examples of VS6 pumps

 VS7

 

      VS7 Vertical Pumps
  • Also Known as ‘False Borehole Pump’

  • Volute casing

  • Higher pressures easily achieved

  • ‘Flow through’ casing bowl

  • Specialised versions for critical services available

  • Supplied on service agency basis

  • As VS2 but with outer casing

  • click here for details and examples of VS7 pumps

 

 

 


 

 

 


 Registered in England & Wales No. 3514372
Registered Office: Rainow Mill, Ingersley Vale, Bollington, Cheshire SK10 5BP